3D Laser Scanning and As-Built Documentation in Toronto
On-Site Measurements supports architectural, engineering, and facility teams across Toronto and the Greater Toronto Area. Projects include commercial interiors, office retrofits, high-rise renovations, MEP coordination, and existing-condition documentation.
Serving Toronto and the GTA
Nationwide service for AEC and facility teams across Canada
Supporting project teams in the AEC and facility sector
Why Measured Documentation Matters in Toronto
Toronto's AEC market involves dense, multi-storey commercial buildings, aging institutional stock, and renovation projects where accurate existing-condition data can reduce coordination risk. Getting measured data before design or construction begins can help architects, engineers, and contractors avoid costly surprises during execution.
Services Available in Toronto
All six services are available for Toronto and the GTA projects. Each engagement is scoped to a confirmed deliverable.
3D Laser Scanning
Point cloud capture for interior and exterior spaces. Registered scan data for coordination, as-built documentation, or BIM workflows.
Scan to BIM
Revit models and IFC files from point cloud data. LOD and discipline scope confirmed before the engagement starts.
As-Built Drawings
2D floor plans, sections, and elevations drafted from scan data. DWG and PDF deliverables for renovation, TI, and design.
CAD Drafting
2D CAD drawings in DWG and PDF, drafted from scan or survey data. Available as a standalone service.
Drone Services
Aerial site documentation, roof imagery, orthomosaic data, and exterior site context capture.
3D Virtual Tours
Hosted, browser-viewable tours for remote review, leasing, facility documentation, and stakeholder access.
Common Project Types in Toronto
The types of projects most commonly supported in Toronto and the GTA.
High-Rise Renovations
Commercial tower fit-outs and multi-storey renovations where existing structural and MEP conditions need to be confirmed before design begins.
Office Retrofits and TI Work
Tenant improvement and commercial office retrofit projects requiring existing floor plans, ceiling heights, and MEP layout documentation.
MEP Coordination
Mechanical, electrical, and plumbing coordination in dense commercial interiors where existing systems need to be documented to support coordination models.
Heritage Buildings
Institutional and heritage buildings in Toronto where irregular geometry and older construction methods require precise measurement before any intervention.
Construction Coordination
Pre-construction and design-assist documentation for complex commercial and institutional projects across the GTA.
Property Documentation
Existing-condition documentation for commercial, industrial, and institutional properties for sale, lease review, or capital planning.
Typical Deliverables for Toronto Projects
File formats and scope are confirmed before the engagement starts. Common outputs for Toronto and the GTA projects are listed below.
| Format | Use |
|---|---|
| E57 / LAS / LAZ / RCP | Registered point cloud files for use in Revit, AutoCAD, or BIM coordination software. |
| DWG / PDF | 2D as-built drawing sets: floor plans, sections, and elevations drafted from scan data. |
| RVT / IFC | Revit models and IFC files for Scan to BIM projects. LOD and discipline scope confirmed before engagement. |
| Drone imagery / orthomosaic | Aerial site documentation and georeferenced orthomap data for exterior and rooftop projects. |
| Hosted tour link | Browser-viewable 3D virtual tour for remote review, leasing, or facility documentation. |
Toronto Service Coverage
These Toronto and the GTA areas are commonly supported. Send your site location and we will confirm access, scope, and travel requirements.
Nearby Areas Served
Not on the list? Send us your location.
Requesting a Quote for a Toronto Project
Toronto projects often involve multi-tenant buildings, controlled access, and coordination with building management. Providing access details upfront helps scope the engagement accurately.
What to send before requesting a quote
- Site address or GTA neighbourhood
- Service needed (scanning, drawings, BIM, CAD, drone, or virtual tour)
- Project type (commercial renovation, office TI, heritage, institutional, industrial)
- Areas to scan or document (floors, zones, or approximate square footage)
- Required deliverables (DWG, PDF, RVT, IFC, E57, tour link)
- Existing drawings or CAD files if available
- Access constraints, building management contacts, or after-hours requirements
- Project timeline or deadline
On-Site Measurements serves projects across the Greater Toronto Area, including North York, Scarborough, Etobicoke, Vaughan, Markham, Mississauga, and Brampton. Send your site location and we will confirm access, scope, and travel requirements.
Common deliverables include registered point cloud files (E57, RCP, LAS/LAZ), 2D as-built drawings in DWG and PDF, and Revit models for Scan to BIM. The right deliverable depends on your project workflow and what your design or engineering team needs.
Yes. Scan to BIM is one of the more common requests for Toronto commercial and office projects. We scan the existing space, register the point cloud, and model the confirmed scope in Revit or deliver an IFC file. LOD and discipline scope are confirmed before the engagement.
Include the site address or neighbourhood, the area to be scanned or documented, the deliverables you need, any existing drawings or CAD files, access restrictions or building management contacts, and your project timeline. The more detail you provide, the faster we can respond with a clear scope.
Yes. Most commercial projects are scanned in occupied or partially occupied spaces. We work around business hours, tenant requirements, and building management protocols. Access and scheduling constraints should be included in your quote request.
Commercial office buildings, retail and mixed-use properties, institutional and healthcare facilities, heritage and older commercial stock, and multi-storey residential and condo buildings. Laser scanning is often considered when existing drawings are missing, outdated, or insufficient for the design or renovation scope.
Locations Hub
View All Canadian Service Areas
See all active city pages and confirm whether On-Site Measurements supports projects in your region.
All LocationsServices
Browse All Reality Capture Services
Six services covering reality capture, as-built documentation, BIM modeling, CAD drafting, drone survey, and virtual tours.
All ServicesCanonical Service Pages
Service Pages in Toronto
Service-specific landing pages with Toronto project context, local use cases, and quote guidance.
Industries We Support in This Service Area
On-Site Measurements supports project teams across different industries in Toronto and the GTA. Each industry page explains how measurement and documentation services apply to that buyer group.
Ready to scope a Toronto project?
Share the site, the scope, and the deliverable your project requires. We will respond with a clear plan for your Toronto and the GTA project.