3D Laser Scanning Services in Edmonton
On-Site Measurements supports AEC and facility teams in Edmonton and surrounding communities. Projects include industrial retrofits, mechanical room documentation, commercial renovations, infrastructure-adjacent work, and as-built drawing deliverables.
Serving Edmonton and surrounding communities
Nationwide service for AEC and facility teams across Canada
Supporting project teams in the AEC and facility sector
Why Measured Documentation Matters in Edmonton
Edmonton's project mix includes a significant volume of industrial, infrastructure-adjacent, and facility documentation work where accurate existing-condition data supports design, renovation, and planning. Laser scanning is commonly used when existing drawings are unavailable, out of date, or insufficient for the confirmed project scope.
Services Available in Edmonton
All six services are available for Edmonton and surrounding communities projects. Each engagement is scoped to a confirmed deliverable.
3D Laser Scanning
Point cloud capture for interior and exterior spaces. Registered scan data for coordination, as-built documentation, or BIM workflows.
Scan to BIM
Revit models and IFC files from point cloud data. LOD and discipline scope confirmed before the engagement starts.
As-Built Drawings
2D floor plans, sections, and elevations drafted from scan data. DWG and PDF deliverables for renovation, TI, and design.
CAD Drafting
2D CAD drawings in DWG and PDF, drafted from scan or survey data. Available as a standalone service.
Drone Services
Aerial site documentation, roof imagery, orthomosaic data, and exterior site context capture.
3D Virtual Tours
Hosted, browser-viewable tours for remote review, leasing, facility documentation, and stakeholder access.
Common Project Types in Edmonton
The types of projects most commonly supported in Edmonton and surrounding communities.
Industrial Retrofit Documentation
Industrial facilities in Edmonton where equipment layouts, mechanical systems, and structural conditions need to be documented before retrofit, expansion, or maintenance planning begins.
Mechanical Room and Utility Spaces
Complex mechanical rooms, utility areas, and building systems in Edmonton facilities where precise dimensional data supports renovation, system replacement, or space coordination.
Commercial Renovation Planning
Commercial office, retail, and mixed-use renovation projects in Edmonton where confirmed as-built layouts are needed before tenant improvement or retrofit work begins.
Facility Asset Documentation
Facilities across Edmonton where dimensional records of existing buildings, equipment, and systems support capital planning or ongoing facility management.
Infrastructure-Adjacent Coordination
Commercial and industrial projects in Edmonton adjacent to or interacting with major infrastructure where existing-condition documentation is needed before construction or coordination begins.
Cold-Weather Access Planning
Edmonton project schedules often include winter conditions. Interior laser scanning proceeds year-round. For exterior or drone scopes, weather and access conditions are reviewed and confirmed during scoping.
Typical Deliverables for Edmonton Projects
File formats and scope are confirmed before the engagement starts. Common outputs for Edmonton and surrounding communities projects are listed below.
| Format | Use |
|---|---|
| E57 / LAS / LAZ / RCP | Registered point cloud files for facility documentation, industrial layout, or BIM coordination. |
| DWG / PDF | 2D as-built drawings: floor plans, sections, and elevations drafted from scan data. |
| RVT / IFC | Revit models and IFC files for Scan to BIM projects. LOD and discipline scope confirmed before engagement. |
| CAD drawings (DWG / PDF) | 2D drawings drafted from scan data for projects that need dimensioned plans without a full BIM scope. |
| Drone imagery | Aerial documentation for large industrial sites and exterior facility conditions where applicable. |
Edmonton Service Coverage
These Edmonton and surrounding communities areas are commonly supported. Send your site location and we will confirm access, scope, and travel requirements.
Nearby Areas Served
Not on the list? Send us your location.
Requesting a Quote for an Edmonton Project
Edmonton industrial and facility projects often have site-specific safety and access requirements. Including access protocols, facility type, existing drawings, and project timeline in your quote request helps scope the engagement correctly.
What to send before requesting a quote
- Site location or Edmonton neighbourhood
- Project type (industrial, commercial, mechanical facility, infrastructure-adjacent)
- Service needed (scanning, drawings, BIM, CAD, drone, or virtual tour)
- Areas to scan or document (floor count, zones, mechanical spaces, or approximate area)
- Required deliverables (DWG, PDF, RVT, IFC, E57, tour link)
- Safety entry procedures or access restrictions
- Existing drawings if available
- Project timeline or deadline
Yes. On-Site Measurements serves Edmonton and surrounding communities after confirming scope, access, and deliverables, including St. Albert, Sherwood Park, Leduc, Spruce Grove, and Fort Saskatchewan. Send your site location and we will confirm travel requirements.
Yes. Industrial facilities and complex mechanical rooms are common project types in Edmonton. Laser scanning can capture equipment layouts, piping runs, structural elements, and confined or difficult-to-measure spaces. Deliverables can include point cloud files, as-built drawings, or Scan to BIM outputs.
Yes. Scan to BIM is available for Edmonton commercial and institutional renovation projects. We scan the existing space, register the point cloud, and model the confirmed scope in Revit or deliver an IFC file. LOD and discipline scope are confirmed before engagement.
Include the site location, project type, areas to be scanned or documented, required deliverables, access and safety restrictions, any existing drawings, and your project deadline. For industrial sites, safety entry procedures and site access contacts are important to include.
Yes. Interior laser scanning is not affected by outdoor weather conditions and proceeds year-round. For exterior or drone scopes, weather, temperature, and airspace conditions may affect scheduling. Include timing requirements in your quote request.
As-built drawings are delivered as 2D floor plans, sections, and elevations in DWG and PDF. Drawings are drafted by a technician from scan data. CAD drafting from existing scan data is also available as a separate service if only drawings are needed without the full point cloud scope.
Locations Hub
View All Canadian Service Areas
See all active city pages and confirm whether On-Site Measurements supports projects in your region.
All LocationsServices
Browse All Reality Capture Services
Six services covering reality capture, as-built documentation, BIM modeling, CAD drafting, drone survey, and virtual tours.
All ServicesCanonical Service Pages
Industries We Support in This Service Area
On-Site Measurements supports project teams across different industries in Edmonton and surrounding communities. Each industry page explains how measurement and documentation services apply to that buyer group.
Ready to scope an Edmonton project?
Share the site, the scope, and the deliverable your project requires. We will respond with a clear plan for your Edmonton and surrounding communities project.